One of Hottest for Lpg Cylinder Manufacturing Equipment - Decoiler Machine, Straightening and Blanking Machine for LPG Gas Cylinder – Hansheng
One of Hottest for Lpg Cylinder Manufacturing Equipment - Decoiler Machine, Straightening and Blanking Machine for LPG Gas Cylinder – Hansheng Detail:
| Product name | LPG Decoiler,Staight,Blank |
| Application | Forming |
| Usage | Blanking |
| After-sales Service Provided | Engineers are available |
| Raw material | CNG cylinder |
| Power | 110 |
| Prodcution rate | <1000m |
| Process thickness | 5-12mm |
| Rated frequency | 2500 |
| Process length | 400-1050mm |
LPG Gas Cylinder Decoiler, Straightening and Blanking Equipment
Specification
1. Motor power: 46KW
2. Nominal force: 6300KN
3. Max working pressure: 25Mpa
4. Speed of slide to go down: 120mm/s
Speed of slide to press: 6-8mm/s
Speed of slide to go up: 55mm/s
5.Table size(left and right): 1500mm
6.Table size(front and rear): 2500mm
7.Weight of hydraulic press is 23ton, of de-coiler is 12ton.
8.Working power for 15kg cylinder is 300ton.
Straightening roller: ¢90(Up 5 low 4), with one set support roller
Material conveyor: ¢115*1 set, with one set support roller
Coil weight: Max. 15Ton
Feeding direction and height can be adjustable.
Straightening adjust: servo driven, digital show.
Rack motor: 7.5KW, servo motor: 7.5KW
Feeding trolley working table size: 1250*800mm
Feeding trolley lifting distance: 350mm(suitable for 1000-1500mmOD coil)
Raw material specification
Raw steel plate
1. Thickness 2-4mm
2. Width : ≤1170mm. Can be designed according to customers’ requirement.
3. Inside Diameter of steel coil: 450-800mm
4. Outside diameter of steel coil: ≤1800mm
5. Weight of steel coil: ≤25ton
Hydraulic system is a two-pump dual hydraulic system (piston pump and gear pump), and the two pumps can operate independently.
1. The fuselage is a steel plate welded structure, which requires good rigidity and stability. The fuselage weighs about 8 tons (excluding hydraulic system and loading and unloading systems).
2. The cylinder body is positioned at the front, the electronic encoder is positioned accurately, the rear is positioned with a screw drive, and the rear cylinder pushes the front The sliding seat moves back and forth on the guide rail.
FAQ
Q: How can we guarantee quality?
A: Always a pre-production sample before mass production; Always final Inspection before shipment;
Q: What’s the size of Steel Round piece you are using?
A: We can make recommendations according to your needs.
Q: Why should you buy from us not from other suppliers?
A: Wuxi Longterm Group is group corporation which are professional supplier of cable, LPG gas cylinder, steel drum, LNG and CNG
machinery with more than 25 years of experience and a strong professional R & D team
Q: What services can we provide?
A: Online technical support, On-site installation, Spare parts…
We need to know the following information to make the quotation to you:
1. The technical drawing of the cylinder.
2. Daily capacity.
Product detail pictures:
Related Product Guide:
It truly is our responsibility to fulfill your requirements and successfully provide you. Your fulfillment is our best reward. We're seeking forward in your check out for joint development for One of Hottest for Lpg Cylinder Manufacturing Equipment - Decoiler Machine, Straightening and Blanking Machine for LPG Gas Cylinder – Hansheng , The product will supply to all over the world, such as: Amsterdam, moldova, Moldova, Our company sets up several departments, including production department, sales department, quality control department and sevice center,etc. only for accomplish the good-quality product to meet customer's demand, all of our products have been strictly inspected before shipment. We always think about the question on the side of the customers,because you win,we win!
By Eileen from Marseille - 2017.03.07 13:42
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Dorothy from Jordan - 2017.08.21 14:13